product

TT-2100G

TT-2100G

Corresponding to high-accuracy/mass-production parts of automobile industry!

High accuracy, automation, and high productivity in minimized space!

TT-2100G is a parallel twin-spindle lathe equipped with high speed gantry loader as standard and corresponding to high-accuracy/mass-production machining. The low-center height structure with low gravity center achieves both stable cutting and high speed loader transfer, realizing high efficiency and high production.

Chuck Size : 6", 8"

Loader specification optimum for your production plan is selectable.

Loader Target Workpiece

φ80×80ｍｍ、0.7kg×2 φ160×80ｍｍ、3.0kg×2

Machine Main Specifications Applied to gantry loader type A or type B
  （Turning）
TT-2100G
Chuck Size inch 6+6 8+8
Type of Turret   10-Station Turret
（All-Holder Type）		 12-Station Turret
（All-Holder Type）		 10-Station Turret
（All-Holder Type）		 12-Station Turret
（All-Holder Type）
Max. Turning Diameter mm φ240
Max. Turning Length mm 135.5 94
Spindle Speed min-1 4500 [OP. 6000] 3200 [OP. 4500]
Rotary Tool Speed min-1 -
Rapid Traverse Rate m/min X : 24 / Z : 24
Spindle Motor
（15 min/continuous）		 kW 7.5/5.5 [OP. 11/7.5] 11/7.5
Rotary Tool Motor
（15 min/continuous）		 kW -
Machine Height mm 2700
Required Floor Space mm 2825×2615
Machine Weight kg 5200
  （Turning＆Milling）
TT-2100CMG
Chuck Size inch 6+6 8+8
Type of Turret   Rotary Tool Type 10-Station Turret Rotary Tool Type 10-Station Turret
Max. Turning Diameter mm φ240
Max. Turning Length mm 135.5 94
Spindle Speed min-1 4500 [OP. 6000] 3200 [OP. 4500]
Rotary Tool Speed min-1 2500
Rapid Traverse Rate m/min X : 24 / Z : 24
Spindle Motor
（15 min/continuous）		 kW 7.5/5.5 [OP. 11/7.5] 11/7.5
Rotary Tool Motor
（15 min/continuous）		 kW 5.5/3.7
Machine Height mm 2700
Required Floor Space mm 2825×2615
Machine Weight kg 5400
Loader Target Workpiece
Chuck Size inch 6+6 8+8
Outside Diameter mm φ80 [OP. φ160*1] φ160 [OP. φ80*2]
Length mm 80
Weight kg 0.7 (×2) [OP. 3 (×2)*1] 3 (×2) [OP. 0.7 (×2)*2]

[*1] or [*2] are options by a set.

Work Piece Feeder Specifications
Chuck Size inch 6+6 8+8
Number of Pallets 16
Loading Capacity(Per Pallet) kg 40
Work Stacking Height mm 450
Feature

Easy process management using dedicated button Easy measurement management

  • The bed has a tank bed structure which can keep thermal displacement to the minimum all day.
  • Wide rectangular slideways are used in the X-/Z-axes sliding surfaces to realize stable machining with high accuracy over a long period of time.
  • There are two types of specifications for high accuracy spindle on the headstock: "6" chuck specification" and "8" chuck specification", which are combined with FANUC's high performance spindle motors to provide excellent performance.
  • 10-station turret (T10) is equipped as standard, and 12-station turret (T12) for multiple processes and 10-station milling turret (T10M) for milling processes are optionally available.
  • ENERGY SAVING SYSTEM / Environment Friendly Reduction of power consumption. Use of oil-water separator extends the coolant life.
  • Convenient and easy-to-operate software is installed for operators to reduce non-production time such as setup work.
The transfer turnover unit is also equipped as standard.

The device allows simultaneous front and back machining.
Exhibiting optimum performance on the top of each spindle.
* Unlike connecting two one-spindle lathes with a reversing device provided between them, even the space efficiency is obvious.

Operate the machine after selecting right or left with the button. Operation is possible only on the side with the indication lamp turned on. When both of the lamps are turned off, the machine cannot be operated.

Operation on Right Side

Easy operation by integrating right and left machine information!

Tool Offset Screen (Example)

Easy loader teaching by guide diagram!

RAKU-RAKU Loader 4 Screen (Example)