Low price, high value addition, and high production
High performance Multi-Tasking Center
New generation multi-tasking machine realizing both process integration and high cost performance!
Usability is realized by large axis travel of X-axis 640 mm, Y-axis 230 mm, and Z-axis 690 mm. Thanks to the large travel amount, highly accurate machining of such as milling and end face drilling is possible by one chucking with the C-axis (spindle) fixed.
The tool spindle index function (B-axis) extends machinable range and easily corresponds to various workpieces. The tool spindle can perform high accuracy indexing of ±130°every 1° , allowing integration of different processes by one tool.
The turning tool is positioned and fixed to the tool spindle by the highly accurate index coupling of the tool spindle milling spindle, and multi-functional tools for OD turning can be used.
|Right Spindle Stock||-||●|
|Tailstock (NC Servo Type)||●||-|
|Type of Turret||Tool Spindle with ATC||Tool Spindle with ATC|
|Max. Turning Diameter||mm||φ500|
|Max. Turning Length *1||mm||610|
|Bar Capacity（Left Spindle） *2||mm||φ65|
|Bar Capacity（Right Spindle） *2||mm||-||φ51|
|B-Axis Swivel Range||deg||230 （±115）|
|Left Spindle Speed||min-1||5000||5000|
|Right Spindle Speed||min-1||-||5000|
|Tool Spindle Speed||min-1||12000|
|ATC Tool Storage Capacity||40 [OP. 80]|
|Rapid Traverse Rate||m/min||X : 40 / Z : 40 / Y : 40 / A : 20|
|Left Spindle Motor（30 min/continuous）||kW||15/11|
|Right Spindle Motor（30 min/continuous）||kW||-||11/7.5|
|Tool Spindle Motor （15min/continuous）||kW||11/7.5|
|Required Floor Space||mm||4150×2923|
●: Standard －: None
*1) The maximum machining length differs depending on the chuck type. When the machining length is 435 mm or more, the end face machining range is limited.
*2) Please note the bar capacity follows types of chucks and cylinders.
"TiwaP-1" is an interactive programming system fully supporting creation, simulation, and execution of machining programs to reduce operator' labor.
"Input" by the interactive system is easy for the operator to create programs without knowledge of G codes. "Check" of programs can be done by simulating the cutting results with 3D animation and tool path drawing. In "Operation", the machining spindle and the order of process types are automatically recognized to optimally execute spindle control and C-axis zero return.