product

TT-Series
Parallel Twin-Spindle,
Twin-Turret CNC Lathe

Proposing and totally supporting mass production automation system!

TAKISAWA's parallel twin-spindle CNC lathe (TT) is a CNC lathe with two spindles oriented to the front and arranged in parallel each other.
The spindles can be controlled independently in machining.
The CM specification can integrate the processes of workpieces involving both turning and milling processes.
It can correspond to the needs for high productivity by constructing various automation processes, such as simultaneous front and back machining, symmetric machining, and full-automatic machining, using TAKISAWA's original gantry loader with turnover unit.

TT-500GD

Flexibly Supporting Any Type of Production

High accuracy, automation, and high productivity in minimized space!

TT-500GD supports 5" chuck, which is minimum in parallel twin-spindle CNC lathe TT series. A twin gantry provided as standard is optimum for workpieces with short machining tact time, and the loading time is accelerated to 2.5 seconds. So, the non-cutting time is further reduced.
The high accuracy comb type tool slide is equipped. Non-cutting time can be reduced compared with the turret type. Five tools can be mounted, sufficient for small parts machining.

Chuck Size : 5"

Loader specification optimum for your production plan is selectable.

Loader Target Workpiece

φ50×50mm、0.5kg×2

  • More detailsOpen or Close
    Machine Main Specifications
      (Turning)
    Chuck Size inch 5+5
    Type of Turret   Comb Type Tool Slide
    Number of Attachable Tools, Tool Slide Width mm 5 Tools, 330
    Max. Turning Diameter mm φ50
    Max. Turning Length mm 50
    Spindle Speed min-1 5000 [OP. 8000]
    Rapid Traverse Rate m/min X : 20 / Z : 24
    Spindle Motor(15 min/continuous) kW7.5/3.7
    Machine Height mm 2145
    Required Floor Space mm 2560×2512
    Machine Weight kg 4300
    Loader Target Workpiece
    Outside Diameter mm φ50
    Length mm 50
    Weight kg 0.5 (×2)
    Work Piece Feeder Specifications
    Number of Pallets 12
    Loading Capacity(Per Pallet) kg 4
    Work Stacking Height mm 250
    Feature

    Easy process management using dedicated button
    Easy measurement management

    • Twin gantry optimum for workpieces with short machining tact time is equipped as standard.
    • The high power 7.5 kW built-in motor accelerates/decelerates the spindle at a high speed. It takes only 0.8 seconds to reach 5000min-1.
    • The comb type turret is the flat type easy for centering. Even for 50 mm workpieces, five tools can be attached.
    • Achieving both high rigidity and high accuracy by integrated bed and vibration-dispersing slit structure
    • Chip disposal by sufficiently wide 560 mm chip conveyor
    • Easy chip change via large maintenance door
    The high accuracy comb type tool slide is equipped.

    Non-cutting time can be reduced compared with the turret type. Five tools can be mounted, sufficient for small parts machining.
    Five tools can be mounted.

    The transfer turnover unit is also equipped as standard.

    The device allows simultaneous front and back machining.
    *Unlike connecting two one-spindle lathes with a reversing device provided between them, even the space efficiency is obvious.

    Large Maintenance Door

    The right and left machining rooms are provided with the front doors to facilitate tip exchange, etc.

    Easy operation by integrating right and left machine information!

    Tool Offset Screen (Example)

    Easy loader teaching by guide diagram!

    RAKU-RAKU Loader 4 Screen (Example)

TT-1100G

Ultrafast Loading by New System!

Non-cutting Time Drastically Reduced!

Takisawa twin chucker TT-1100G is a parallel 2-spindle CNC lathe with a completely new loading system that realizes loading time of 1.7 seconds.

Ultrafast Loading System

The loader area is positioned in front of the machining chamber (Front waiting system) to significantly reduce the loading distance. Furthermore, the machine adopts the ultrahigh-speed loading system in which the spindle moves forward to the loading position. The combination of this structure and high-speed 3-axis loader realizes ultrahigh-speed loading of 1.7 seconds.

Chuck Size : 6"

Loader specification optimum for your production plan is selectable.

Loader Target Workpiece

φ80×80mm、0.7kg×2

  • More detailsOpen or Close
    Machine Main Specifications Applied to gantry loader type A
        (Turning)
    Chuck Size inch 6+6
    Type of Turret   10-Station Turret(All-Holder Type)
    Max. Turning Diameter mm φ140
    Max. Turning Length mm 121
    Spindle Speed min-1 4500 [OP. 6500]
    Rapid Traverse Rate m/min X : 24 / Z : 30
    Spindle Motor (15 min/continuous) kW 5.5/3.7 [OP. 7.5/5.5]
    Machine Height mm 2450
    Required Floor Space mm 2258×3327
    Machine Weight kg 5800
    Loader Target Workpiece
    Outside Diameter mm φ80
    Length mm 80
    Weight kg 0.7(×2)
    Work Piece Feeder Specifications
    Number of Pallets 14
    Loading Capacity (Per Pallet) kg 25
    Work Stacking Height mm 450
    Feature

    Easy process management using dedicated button Easy measurement management

    • The bed has a tank bed structure which can keep thermal displacement to the minimum all day.
    • X- and Z-axis roller guides are mounted on the same column. X-axis is arranged vertically to reduce machine width.
    • The right and left turrets are the same 10-station all-holder type with the powerful bolt clamping system.
    • ENERGY SAVING SYSTEM / Environment Friendly Reduction of power consumption. Use of oil-water separator extends the coolant life.
    The transfer turnover unit is also equipped as standard.

    The device allows simultaneous front and back machining.
    Exhibiting optimum performance on the top of each spindle.
    * Unlike connecting two one-spindle lathes with a reversing device provided between them, even the space efficiency is obvious.

    Front Waiting System
    Easy operation by integrating right and left machine information!

    Tool Offset Screen (Example)

    Easy loader teaching by guide diagram!

    RAKU-RAKU Loader 4 Screen (Example)

TT-2100G

Corresponding to high-accuracy/mass-production parts of automobile industry!

High accuracy, automation, and high productivity in minimized space!

TT-2100G is a parallel twin-spindle lathe equipped with high speed gantry loader as standard and corresponding to high-accuracy/mass-production machining. The low-center height structure with low gravity center achieves both stable cutting and high speed loader transfer, realizing high efficiency and high production.

Chuck Size : 6", 8"

Loader specification optimum for your production plan is selectable.

Loader Target Workpiece

φ80×80mm、0.7kg×2 φ160×80mm、3.0kg×2

  • More detailsOpen or Close
    Machine Main Specifications Applied to gantry loader type A or type B
      (Turning) (Turning&Milling)
    TT-2100G TT-2100CMG
    Chuck Size inch 6+6 8+8 6+6 8+8
    Type of Turret   10-Station Turret
    (All-Holder Type)
    12-Station Turret
    (All-Holder Type)
    10-Station Turret
    (All-Holder Type)
    12-Station Turret
    (All-Holder Type)
    Rotary Tool Type 10-Station Turret Rotary Tool Type 10-Station Turret
    Max. Turning Diameter mm φ240 φ240
    Max. Turning Length mm 135.5 94 135.5 94
    Spindle Speed min-1 4500 [OP. 6000] 3200 [OP. 4500] 4500 [OP. 6000] 3200 [OP. 4500]
    Rotary Tool Speed min-1 - 2500
    Rapid Traverse Rate m/min X : 24 / Z : 24 X : 24 / Z : 24
    Spindle Motor
    (15 min/continuous)
    kW 7.5/5.5 [OP. 11/7.5] 11/7.5 7.5/5.5 [OP. 11/7.5] 11/7.5
    Rotary Tool Motor
    (15 min/continuous)
    kW -5.5/3.7
    Machine Height mm 2700 2700
    Required Floor Space mm 2825×2615 2825×2615
    Machine Weight kg 5200 5400
    Loader Target Workpiece
    Chuck Size inch 6+6 8+8
    Outside Diameter mm φ80 [OP. φ160*1] φ160 [OP. φ80*2]
    Length mm 80
    Weight kg 0.7 (×2) [OP. 3 (×2)*1] 3 (×2) [OP. 0.7 (×2)*2]

    [*1] or [*2] are options by a set.

    Work Piece Feeder Specifications
    Chuck Size inch 6+6 8+8
    Number of Pallets 16
    Loading Capacity(Per Pallet) kg 40
    Work Stacking Height mm 450
    Feature

    Easy process management using dedicated button Easy measurement management

    • The bed has a tank bed structure which can keep thermal displacement to the minimum all day.
    • Wide rectangular slideways are used in the X-/Z-axes sliding surfaces to realize stable machining with high accuracy over a long period of time.
    • There are two types of specifications for high accuracy spindle on the headstock: "6" chuck specification" and "8" chuck specification", which are combined with FANUC's high performance spindle motors to provide excellent performance.
    • 10-station turret (T10) is equipped as standard, and 12-station turret (T12) for multiple processes and 10-station milling turret (T10M) for milling processes are optionally available.
    • ENERGY SAVING SYSTEM / Environment Friendly Reduction of power consumption. Use of oil-water separator extends the coolant life.
    • Convenient and easy-to-operate software is installed for operators to reduce non-production time such as setup work.
    The transfer turnover unit is also equipped as standard.

    The device allows simultaneous front and back machining.
    Exhibiting optimum performance on the top of each spindle.
    * Unlike connecting two one-spindle lathes with a reversing device provided between them, even the space efficiency is obvious.

    Operate the machine after selecting right or left with the button. Operation is possible only on the side with the indication lamp turned on. When both of the lamps are turned off, the machine cannot be operated.

    Operation on Right Side

    Easy operation by integrating right and left machine information!

    Tool Offset Screen (Example)

    Easy loader teaching by guide diagram!

    RAKU-RAKU Loader 4 Screen (Example)

TT-2600G/T-2600G

Corresponding to high-accuracy/mass-production parts of automobile industry!

High accuracy, automation, and high productivity with its incomparably high rigidity!

TT-2600G is a parallel twin-spindle lathe equipped with high speed gantry loader as standard and corresponding to high-accuracy/mass-production machining.
The structure is similar to highly rigid universal 2-axis lathes, succeeding the machine rigidity and cutting performance. Its stable continuous operation and high speed loader transfer realize high efficiency and high production.

Chuck Size : 8", 10"

Loader specification optimum for your production plan is selectable.

Loader Target Workpiece

φ160×100mm、4.0kg×2
φ200×120mm、8.0kg×2

Cycle Time

30.3 seconds (Reduced by 25% compared to former model)

* TT-2600GA type with loader option

  • More detailsOpen or Close
    Machine Main Specifications Applied to gantry loader type A or type B
      (Turning) (Turning&Milling)
    TT-2600G TT-2600CMG
    Chuck Size inch 8+8 10+10 8+8 10+10
    Type of Turret   10-Station Turret
    (All-Holder Type)
    Rotary Tool Type 10-Station Turret
    Max. Turning Diameter mm φ290 φ290
    Max. Turning Length mm 214 204 214 204
    Spindle Speed min-1 4500 [OP. 3200, 2500] 3200 [OP. 4000, 2500] 4500 [OP. 3200, 2500] 3200 [OP. 4000, 2500]
    Rotary Tool Speed min-1 - 4000
    Rapid Traverse Rate m/min X : 24 / Z : 24 X : 24 / Z : 24
    Spindle Motor kW 11/7.5
    [OP. 15/11]
    (15 min/continuous)
    15/11
    (15 min/continuous)
    [OP. 18.5/15(30 min/continuous)]
    11/7.5
    [OP. 15/11]
    (15 min/continuous)
    15/11
    (15 min/continuous)
    [OP. 18.5/15(30 min/continuous)]
    Rotary Tool Motor
    (S3 25%/15 min/continuous)
    kW -5.5/5.5/3.7
    Machine Height mm 3629 [OP. 2983*1]3718 [OP. 3180*1]3629 [OP. 2983*1]3718 [OP. 3180*1]
    Required Floor Space mm 3150×29383335×29383150×29383335×2938
    Machine Weight kg 6300640063006400

    *1) 2 steps loader.

    Loader Target Workpiece
    Chuck Size inch 8+8 10+10
    Outside Diameter mm φ160 φ200
    Length mm 100 120
    Weight kg 4 (×2) 8 (×2)
    Work Piece Feeder Specifications
    Chuck Size inch 8+8 10+10
    Number of Pallets 16 14
    Loading Capacity(Per Pallet) kg 40 70
    Work Stacking Height mm 450 400
    Feature

    Easy process management using dedicated button Easy measurement management

    • The bed has a tank bed structure which can keep thermal displacement to the minimum all day.
    • Wide rectangular slideways are used in the X-/Z-axes sliding surfaces to realize stable machining with high accuracy over a long period of time.
    • There are two types of specifications for high accuracy spindle on the headstock: "8" chuck specification" and "10" chuck specification", which are combined with FANUC's high performance spindle motors to provide excellent performance.
    • 10-station turret (T10) is equipped as standard, and 10-station milling turret (T10M) for milling processes are optionally available.
    • ENERGY SAVING SYSTEM / Environment Friendly Reduction of power consumption. Use of oil-water separator extends the coolant life.
    • Convenient and easy-to-operate software is installed for operators to reduce non-production time such as setup work.
    The transfer turnover unit is also equipped as standard.

    The device allows simultaneous front and back machining.
    Exhibiting optimum performance on the top of each spindle.
    * Unlike connecting two one-spindle lathes with a reversing device provided between them, even the space efficiency is obvious.

    Operate the machine after selecting right or left with the button. Operation is possible only on the side with the indication lamp turned on. When both of the lamps are turned off, the machine cannot be operated.

    Operation on Right Side

    Easy operation by integrating right and left machine information!

    Tool Offset Screen (Example)

    Easy loader teaching by guide diagram!

    RAKU-RAKU Loader 4 Screen (Example)

    T-2600G 1-spindle CNC lathe (Corresponding to odd processes)

    The structure is similar to highly rigid universal 2-axis lathes, succeeding the machine rigidity and cutting performance. Thanks to its stable continuous operation and high speed loader transfer, it corresponds to odd processes by linking with TT-2600G. The basic specifications are the same as TT-2600. It can also be used as a standalone cell.

    Chuck Size : 8", 10"

    Loader specification optimum for your production plan is selectable.


    Loader Target Workpiece

    φ160×100mm、4.0kg×2
    φ200×120mm、8.0kg×2

TT-350G

Corresponding to medium or large sized workpieces for automobile and construction machine industries

Powerful cutting, high accuracy, automation, and high productivity with its totally high rigidity!

TT-350G is a totally highly rigid parallel twin-spindle CNC lathe. It corresponds to workpieces requiring heavy-duty cutting and intermittent cutting with its overhang-less slideway bed structure. It is optimum for mass-production 12" (10") chuck work machining.

  • Incomparably close accessibility
  • Loader specification is available for heavy workpieces.
  • X/Z-axis slideway and turret use the same highly rigid and highly reliable structures as universal 2-axis lathes.
  • Wide rectangular slideways are used in the X-/Z-axes sliding surfaces to realize stable machining with high accuracy over a long period of time.
  • Convenient and easy-to-operate software is installed for operators to reduce non-production time such as setup work.
  • ENERGY SAVING
  • More detailsOpen or Close
    Machine Main Specifications Applied to gantry loader type A or type B
      (Turning) (Turning&Milling)
    TT-350G TT-350CMG
    Chuck Size inch 12+1210+10 10+10 10+10
    Type of Turret   8-Station Turret
    (Direct-Mount Type)
    10-Station Turret
    (Direct-Mount Type)
    12-Station Turret
    (Direct-Mount Type)
    Rotary Tool Type
    12-Station Turret
    Max. Turning Diameter mm φ460 φ460
    Max. Turning Length mm 325326 281
    Spindle Speed min-1 3000 [OP. 2000, 4000] 3000 [OP. 2000, 4000]
    Rotary Tool Speed min-1 - 3600
    Rapid Traverse Rate m/min X : 24 / Z : 24 X : 24 / Z : 24
    Spindle Motor
    (30 min/continuous)
    kW 18.5/15 [OP. 22/18.5] 18.5/15 [OP. 22/18.5]
    Rotary Tool Motor
    (15 min/continuous)
    kW -3.7/1.1
    Machine Height mm 4493 4493
    Required Floor Space mm 4395×3753 4395×3753
    Machine Weight kg 13500 13700
    Loader Target Workpiece
    Outside Diameter mm φ280
    Length mm 160
    Weight kg 15 (×2)
    Work Piece Feeder Specifications
    Number of Pallets 14
    Loading Capacity(Per Pallet) kg 70
    Work Stacking Height mm 400